- 您现在的位置：买卖IC网 > Sheet目录688 > FLUKE-805 (Fluke Electronics)VIBRATION METER
Vibration Meter
About Measurements
Crest Factor+ (High Frequency Measurement)
Crest Factor is the ratio of the peak value / RMS value of a
time domain vibration signal. Vibration analysts use this
ratio to find bearing faults. However, the Crest Factor
method has a key limitation. The Crest Factor increases
during initial bearing degradation when the peak value
increases. It then decreases as the bearing damage
worsens and the RMS value increases. A low Crest Factor
value could show a healthy bearing or a significantly
degraded bearing. The problem is to know the difference
between the two.
The Meter operates with a proprietary algorithm,
Crest Factor+ (CF+), to overcome this limitation. To make
interpretation easy for the user, the CF+ value shows in a
range from 1 to 12. The higher the CF+ value is, the more
the bearing damage. Table 5 shows the relationship of the
values of CF+ to vibration severity.
Table 5. Crest Factor+
Quick Measurement
A quick measurement is a measurement without setup
steps to get a fast measurement for bearing vibration,
overall vibration, and temperature measurement.
To make a quick measurement:
1. Push O to turn on the Meter.
The default screen appears without any machine
ID or Machine Category.
2. Push N .
3. Apply compression force between the sensor tip
and test surface until the green LED turns on.
4. Wait until the green LED turns off and shows the
test result.
The overall vibration and temperature
measurements show on the display.
CF+
1 to 3
4 to 6
7 to 9
10 to 12
Severity
Good
Satisfactory
Unsatisfactory
Unacceptable
The CF+ value shows for each measurement in the
Bearing field on the Meter display. Push 6 and 7 to toggle
between the CF+ value and the high frequency vibration
level in units of velocity, acceleration, and displacement.
gqi48.bmp
19
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
FMBP12BF
KEYPAD 12 KEY ILLUM MEMBRANE GRY
FNC500124
OSC 125.00937MHZ 3.3V SMD
FNC500127
OSC 125MHZ 2.5V SMD
FNC500135
OSC 125.00375MHZ 1.8V SMD
FNDDR1133
OSC 133.33MHZ 3.3V SMD
FNEPON125
OSC 125MHZ 3.3V SMD
FNETHE025
OSC 25MHZ 3.3V SMD
FNGEPO002
OSC 2.048MHZ 3.3V SMD
相关代理商/技术参数
FLUKE80K1
制造商:Hart Scientific / Fluke 功能描述:PROBE, 80PK-1, BEADED TYPE K W/ 2373-LTC 制造商:Fluke Electronics 功能描述:Probe, 80PK-1, Beaded Type K w/ 2373-LTC
FLUKE80K3
制造商:Hart Scientific / Fluke 功能描述:PROBE, 80PK-3A, SURFACE W/ 2373-LTC
FLUKE80TK
制造商:Fluke Electronics 功能描述:THERMOCOUPLE MODULE FOR MULTIMETER
FLUKE-810
制造商:Fluke Electronics 功能描述:Portable Vibration Tester 制造商:Fluke Electronics 功能描述:VIBRATION TESTER, 0.05%; Accuracy %:0.05% ;RoHS Compliant: NA
FLUKE-810 CAL
制造商:Fluke Electronics 功能描述:CALIBRATED WITH CERTS FLUKE-810 SKU # 72R7097
FLUKE-83-5
功能描述:数字万用表 INDUSTRIAL MULTIMETE
RoHS:否 制造商:Tektronix 产品:Multimeters 类型:Bench 准确性:0.04 % 电压范围:2 V to 2 kV 电阻范围: 电容范围: 显示计数: 频率:10 Hz to 45 Hz, 850 Hz to 1 MHz 测距: 真均方根值: 数据保持:
FLUKE83-5
制造商:Fluke Electronics 功能描述:MULTIMETER FLUKE 83V
FLUKE-83-5 CAL
制造商:Fluke Electronics 功能描述:CALIBRATED - INDUSTRIAL MULTIMETER